Latest articles

Keep ‘unpleasant surprises’ out of your grain bins this fall

Don’t neglect the basics when storing grain or oilseeds, says provincial crop specialist

A little preparation prior to harvesting can ensure worry-free winter crop storage, says a provincial crop specialist.

“Warm or wet conditions at harvest and multi-staged crops are potential ingredients for storage problems,” said Harry Brook. “Take the time to monitor the stored grain’s condition and cool those bins down. Don’t get an unpleasant surprise when selling the grain with discounts or by being rejected for heated grain or insect problems.”

Start by cleaning up spilled grain from around bins so they’re not breeding sites for beetles. “Most empty grain bins will have some form of insect or mites feeding on the cereal crop residue,” he said. “These bins need to be swept or vacuumed out with the debris being either burned or buried.”

Malathion can be sprayed in nooks and crannies — but only in bins used to store cereals.

“It is forbidden to use malathion in bins used to store oilseeds,” said Brook. “Empty bins can also be treated with diatomaceous earth prior to storing all crops. Diatomaceous earth can also be added to the crop as the bin is filling as a preventive measure.”

Hot or damp grain can not only spoil but act as a beacon to cereal grain insects.

“Rusty grain beetles are good fliers and they home in on hot grain, infiltrating the bin and starting to breed in the high-moisture zone,” he said.

Alberta Agriculture has an FAQ web page for grain storage, which includes a chart that shows approximately how long damp grain can be stored safely and estimates the amount of time for safe storage.

“Be warned that deterioration can start to occur before the time expires,” said Brook. “It still has to be either dried or aerated. Grain aeration is best used in the fall to cool the crop temperatures down, allowing the crop to be safely stored over the winter.”

Drying via aeration requires warmer temperatures and low humidity, which are often lacking in the fall.

“Fall temperatures will continue to drop, lengthening the time it takes to bring moisture levels down. Even dry, hot grain placed in a bin creates moisture migration. It takes time for grain to stop respiring and moisture to equalize in the bin.”

Cold air outside will cool the grain against bin sides and moisture will move down the outsides of the bin and then come up the middle, he added.

“If there is any place for the moisture to accumulate, it will be just below the top, middle of the bin. Green seed or immature seed in the bin may also contain more moisture and add to the problem.

“This is why it is imperative when harvesting hot grain to cool it quickly. Aeration under hot harvest temperatures is important to get the grain or oilseed temperature down to a safe storage level.”

About the author

Alberta Agriculture and 
Forestry's recent articles

explore

Stories from our other publications

Comments